Ethernet 0 setup

A cable between the Ethernet adapter on the DINGO device and the local area network, has to be connected for this setup to work.

Static or DHCP: This radio item group determines if the Ethernet setup should use DHCP or Static IP. If DHCP is select then the DINGO device will acquire IP, subnet mask and gateway automatically from a DHCP server on the network. If Static is selected then the user has to fill in the appropriate information for IP address, subnet mask and gateway.

IP address: The IP address that the DINGO device will use on the network.

Subnet mask: The subnet mask for the network that the DINGO device is connected to.

Gateway: The IP address of the router on the network that the DINGO device is connected to.